Overview
The Englefield Electronic Bidet Seat brings warm-water washing to an existing toilet, with all controls on a panel built into the right-hand side of the seat. It suits a wide range of Englefield and other toilet pans – check yours with the compatibility template below.
Choose rear or front (feminine) cleansing, with an oscillating spray to cover a wider area, and adjust nozzle position and water pressure to suit. Water is kept warm in a heated reservoir, and the seat, water and dryer temperatures can each be set or switched off. There’s also a warm air dryer, a deodouriser and two power-saving modes.
Hygiene is built in: the stainless steel nozzle cleans itself automatically, and a sitting sensor means the wash functions only operate when someone is seated – so children can’t set it off by accident. The Quiet-Close seat closes gently, and the Quick-Release design lets you lift the whole unit off its mounting plates to clean around the pan.
Installation: the water connection must be made by a licensed plumber in line with AS/NZS 3500.1, including a high hazard backflow prevention device if one is not already fitted on site (not supplied). The seat needs a power point with RCD protection beside the toilet (a dedicated outlet rated over 7 A – no extension leads or double adaptors) – if there isn’t one, have it installed by a licensed electrician.
Specifications
| Model | 99286A-0 |
|---|---|
| Colour / material | White / polypropylene |
| Overall length | 505 mm |
| Controls | Side control panel, user’s right-hand side |
| Compatible toilet pans | Pan width 340–380 mm; seat fixing holes to front of pan 425–475 mm; fixing hole centres 130–200 mm; at least 30 mm between cistern and fixing holes |
| Water connection | G1/2″ inlet; cold water supply only |
| Water pressure | 220–500 kPa |
| Water heating | Heated water reservoir |
| Power supply | 240 V AC, dedicated outlet rated over 7 A; RCD protection required |
| Wash modes | Rear, front (feminine), oscillating, turbo, auto/child |
| Comfort | Heated seat, warm air dryer, deodouriser |
| Energy saving | Two power-saving modes (Lo Econo / Hi Econo) |
| Safety | Sitting sensor – wash functions only operate when seated |
| Seat | Quiet-Close, Quick-Release |
| Maximum user weight | 120 kg |
| Certification | WaterMark certified to WMTS-051:2016; complies with AS/NZS 60335.2.84 electrical safety standard |
| In the box | Electronic bidet seat, seat fixing kit, ionic in-line water filter, T-connector, water inlet hose, check (non-return) valve, low–medium hazard backflow prevention device, installation instructions and quick start guide |
| Not included | High hazard backflow prevention device (required under AS/NZS 3500.1 if not already installed) |
Downloads
Download the Electronic Bidet Seat specification sheet (PDF)
Download the Electronic Bidet Seat installation and user guide (PDF)
Download the Electronic Bidet Seat features flyer (PDF)
Download the bidet seat compatibility template (A1) (PDF)
RETURNS POLICY
Important – Toilet Seat Returns
For hygiene reasons, toilet seats cannot be returned or exchanged for change of mind once the packaging has been opened. Please check your measurements and compatibility carefully before ordering/opening packaging.












