Replacement cartridge for the Puretec PureMix Z6
The Z6-R is the genuine Puretec replacement cartridge for the PureMix Z6 under sink water filter. Puretec recommends replacing it at least every 6 months or 60,000 litres, whichever comes first, or sooner if you notice a change in taste, odour or flow.
What it does
- Filters sediment down to 0.1 micron*
- Protects against cysts and bacteria such as E. coli+
- Reduces chlorine, chloramine, taste and odour
- Designed for mains (town) water
Specifications
| Model | Z6-R |
|---|---|
| Suits | Puretec PureMix Z6 (PUREMIX-Z6-LF) |
| Cartridge size | 2.5″ × 15″ |
| Micron rating | 0.1 micron* |
| Flow rate | 9.5 L/min |
| Fitting | Quarter-turn quick-twist |
| Replace | At least every 6 months or 60,000 litres^, whichever comes first |
Changing the cartridge
- Turn off the water supply to the filter and release the pressure, as described in your Puretec user guide.
- Turn the old cartridge a quarter turn to release it from the filter head.
- Fit the new cartridge and turn it a quarter turn until it locks in place.
- Turn the water back on, check for leaks and flush the new cartridge as the user guide describes.
Which cartridge fits my filter?
| PureMix Z6 | Z6-R (this cartridge) |
|---|---|
| PureMix Z7 | Z7-R: 1 micron, for rain, rural and harsh water |
| PureMix X7 | X7-R: a shorter 12″ cartridge |
Downloads
Download the Puretec Mains water product guide (PDF, 28.9 MB)
Frequently asked questions
Will the Z6-R fit my PureMix Z7?
Use the cartridge made for your model: the Z7 takes the Z7-R, designed for higher-sediment water.
Is this a genuine Puretec cartridge?
Yes. We supply genuine Puretec cartridges, not compatible copies.
How do I know I have a Z6?
The model (PUREMIX-Z6-LF) is on the label on the unit. If in doubt, text us a photo.
See all water filter replacement cartridges.
Not sure which part fits? Call or text us on 0447 203 775 with your system’s model (it’s on the label on the unit) or a photo, and we’ll check for you.
*Micron rating is nominal.
^Capacity is based on inlet chlorine at 2 ppm ±10%.
+Puretec: the terms “removal”, “eliminate” and “protection” indicate significant reduction, not necessarily 100% removal.





