Puretec Z1-R replacement cartridge
The Puretec Z1-R (also written Z1R) is the genuine replacement cartridge for Puretec’s Z1 quick-twist under-sink systems, including the Z1-MW-K filter kit, Z12, Z18 and the models in the table below. It’s a 10″ Ultra Z cartridge that filters down to 0.1 micron* in three stages, designed for low-sediment mains water. Puretec recommends replacing it every 6–12 months, depending on water quality and usage.
What it does
- Stage 1: removes+ sediment, rust, sand, silt and algae
- Stage 2: reduces chlorine, pesticides and sulphur, and eliminates+ bad taste and odours
- Stage 3: the Ultra Z membrane filters to 0.1 micron*, protecting+ against Giardia and Cryptosporidium cysts
Which cartridge fits my system?
Systems that take the Z1-R:
| Z1 filter kits | Z1-MW-K (previously Z1-K), Z12, Z18 |
|---|---|
| Tripla and Tripla Elite | Z1-T1 to Z1-T6, Z1-E10, Z1-E20 |
| SPARQ | SPARQ S5, SPARQ H2 |
| Rainwater | Z1-RW-K: stage 2, behind a Z1-S5R (replacement kit) |
| Drinking fountains | Puretec DF15 and DF35 |
Systems that need a different cartridge:
| PureMix Z6, Z7, X7, Z2 | Z6-R, Z7-R, X7-R, Z2-R |
|---|---|
| SPARQ S4 | SPARQ-RC (two per system) |
| QT12, QT18, QT12-T Tripla | QT12R |
| ESR2, ESR2-T Tripla | PL051 and MC011-S |
| TW1, TW1-PL | MB051 and EC951 |
Specifications
| Model | Z1-R |
|---|---|
| Cartridge size | 10″ |
| Dimensions (W × D × H) | 84 × 79 × 266 mm |
| Micron rating | 0.1 micron* |
| Operating pressure | 200–520 kPa |
| Operating temperature | 0–38 °C (protect from freezing) |
| Water supply | Low-sediment mains (town) water |
Changing the Z1-R cartridge
- Turn the old cartridge a quarter turn anticlockwise and pull it out.
- Remove all packaging and caps from the new cartridge.
- Line up the points with the head, push it in and turn it a quarter turn clockwise.
- Reset the LED reminder, if your tap or mixer has one.
- Turn the water on, check for leaks and flush for 5 minutes.
Downloads
Download the Puretec Mains water product guide (PDF, 28.9 MB)
Frequently asked questions
Will the Z1-R fit my PureMix Z6, Z7 or X7?
No. PureMix filters take their own cartridges: Z6-R, Z7-R, X7-R and Z2-R.
Does it fit my SPARQ or Tripla?
Yes for the SPARQ S5 and H2, Tripla Z1-T and Tripla Elite Z1-E. No for the SPARQ S4 or the QT12-T and ESR2-T Tripla kits (see the table).
Can I use a Z1-R in my QT12 or QT18?
No. Puretec lists only the QT12R for QT systems, and it’s a different size.
How often should I replace the Z1-R?
Every 6–12 months, depending on water quality and usage, or sooner if the taste, odour or flow changes.
Can I use it on rainwater?
Only in the Z1-RW-K rainwater kit, behind a Z1-S5R sediment cartridge. Otherwise it’s designed for low-sediment mains water.
Is this a genuine Puretec cartridge?
Yes. We supply genuine Puretec cartridges, not compatible copies.
See all water filter replacement cartridges.
Not sure which part fits? Call or text us on 0447 203 775 with your system’s model (it’s on the label on the unit) or a photo, and we’ll check for you.
*Micron rating is nominal.
+Puretec: the terms “removal”, “eliminate” and “protection” indicate significant reduction, not necessarily 100% removal.
Caution (Puretec): do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.





